ROWA POLITUS - special coating agent Rp 580.000
Glass coating :
- less deposits on aquarium glasses for a better view!
- cleaning glasses rarely required and then easily.
- non-detachable coating: not affecting the water.
- persistent effect: each coating lasts for severalt years.
- for new as well as existing aquariums.
- effect to be recognized quickly. Productivity (10 ml/m²).
- Read carefully the instructions and use as advised.
Package contents:
1 flask cleansing solution
1 flask ROWA® politus coating solution
1 sponge to apply coating solution
some polishing cloths
Precleaning
Moisten the glasses.
Apply the cleansing solution to the glasses and thoroughly wipe clean and dry with tissue paper.
Eventually use lime remover to clean the glasses of used aquariums. The glasses must be spotlessly clean, free of grease, free from tensides and absolutely unwaxed.
Also the residues of the cleansing solution must be completely removed to allow faultless coating.
Do not use any other cleaner.
Coating
The quality of coating unconditionally depends on polishing!
While coating, prevent high temperatures and direct sunlight, which causes the sponge to dry quickly. The glasses must be perfectly dry while coating.
Now apply a little coating solution onto the sponge and rub in the glassess in circular patterns.
At best, apply two times on each section.
Wait 15 minutes.
Now thoroughly remove the resulting mist by polishing with the help of the attached polishing cloths. Remove remaining residues with glass cleaner or alcohol.
Wait 15 minutes. Meanwhile the glass must not be exposed to moisture.
Now the aquarium can be filled with water.
Glass coating :
- less deposits on aquarium glasses for a better view!
- cleaning glasses rarely required and then easily.
- non-detachable coating: not affecting the water.
- persistent effect: each coating lasts for severalt years.
- for new as well as existing aquariums.
- effect to be recognized quickly. Productivity (10 ml/m²).
- Read carefully the instructions and use as advised.
Package contents:
1 flask cleansing solution
1 flask ROWA® politus coating solution
1 sponge to apply coating solution
some polishing cloths
Precleaning
Moisten the glasses.
Apply the cleansing solution to the glasses and thoroughly wipe clean and dry with tissue paper.
Eventually use lime remover to clean the glasses of used aquariums. The glasses must be spotlessly clean, free of grease, free from tensides and absolutely unwaxed.
Also the residues of the cleansing solution must be completely removed to allow faultless coating.
Do not use any other cleaner.
Coating
The quality of coating unconditionally depends on polishing!
While coating, prevent high temperatures and direct sunlight, which causes the sponge to dry quickly. The glasses must be perfectly dry while coating.
Now apply a little coating solution onto the sponge and rub in the glassess in circular patterns.
At best, apply two times on each section.
Wait 15 minutes.
Now thoroughly remove the resulting mist by polishing with the help of the attached polishing cloths. Remove remaining residues with glass cleaner or alcohol.
Wait 15 minutes. Meanwhile the glass must not be exposed to moisture.
Now the aquarium can be filled with water.
